[1] Ceriani N M, Zanchettin A M, Rocco P, et al. A constraint-based strategy for task-consistent safe human-robot interaction[C]//IEEE/RSJ International Conference on Intelligent Robots and Systems. Tokyo, Japan:IEEE, 2013:4630-4635.
[2] 沈建新, 田威. 基于工业机器人的飞机柔性装配技术[J]. 南京航空航天大学学报, 2014, 46(2):181-189.
[3] 张红霞. 国内外工业机器人发展现状与趋势研究[J]. 电子世界, 2013(12):5, 7.
[4] 吴锦辉, 陶友瑞. 工业机器人定位精度可靠性研究现状综述[J]. 中国机械工程, 2020, 31(18):2180-2188.
[5] Ulrich M, Lux G, Piprek T. Analysis and visualisation of the positioning accuracy and underlying effects of industrial robots[J]. Advanced Materials Research, 2014, 1018(3):15-22.
[6] Sulzer J, Kova I. Enhancement of positioning accuracy of industrial robots with a reconfigurable fine-positioning module[J]. Precision Engineering, 2010, 34(2):201-217.
[7] Lim H K, Kim D H, Kim S R, et al. A practical approach to enhance positioning accuracy for industrial robots[C]//Iccas-sice. Fukuoka, Japan:IEEE, 2009:2268-2273.
[8] Jean-Michel R, Eric R, Marc B, et al. Kinematic calibration and geometrical parameter identification for robots[J]. Robotics and Automation, IEEE Transactions on, 1991, 7(6):721-732.
[9] 黄松, 胡晓兵, 周飞, 等. 关节机器人定位精度影响因素分析[J]. 机械, 2014, 41(4):70-74.
[10] Andrei L, Stan G. The influence of reference position deviation on industrial robots positioning precision[J]. IOP Conference Series:Materials Science and Engineering, 2018, 400(5):052003.
[11] Cho Y, Kim M, Cheong J, et al. Simultaneous identification of kinematic screw and joint compliance of elastic robot manipulators using deflected circular trajectories[C]//2017 IEEE International Conference on Advanced Intelligent Mechatronics(AIM). Munich, Germany:IEEE, 2017:382-387.
[12] 吴瑞明, 周晓军, 徐志农. 超声检测机器人误差补偿技术[J]. 传感技术学报, 2005(2):198-201.
[13] Li R, Zhao Y. Thermal effect model analysis and dynamic error compensation of industrial robot[J]. Measurement, 2015, 44(8):2382-2388.
[14] Jawale H P, Thorat H T. Positional error estimation in serial link manipulator under joint clearances and backlash[J]. Journal of Mechanisms & Robotics, 2013, 5(2):021003.
[15] 孙峰. 基于双编码器设计的机器人关节定位精度分析[J]. 仪表技术, 2020, 371(3):37-39.
[16] Choi Y H, Sun D H, Kwon O S. Analysis of precision positioning of multi-axis robot system[C]//International Conference on Control. Busan, Korea (South):IEEE, 2015:2087-2090.
[17] Brethé J F. Innovative kinematics and control to improve robot spatial resolution[C]//IEEE/RSJ International Conference on Intelligent Robots & Systems. Taipei:IEEE, 2010:3495-3500.
[18] 董辉跃, 周华飞, 尹富成. 机器人自动制孔中绝对定位误差的分析与补偿[J]. 航空学报, 2015, 36(7):2475-2484.
[19] Eastin R. ‘WFD’-What is it and what's ‘LOV’ got to do with it[J]. International Journal of Fatigue, 2008, 31(6):1012-1016.
[20] 高航, 王建, 杨宇星, 等. 垂直度误差对复合材料单钉连接性能的影响[J]. 航空学报, 2017, 38(2):280-288.
[21] Thoppul S D, Finegan J, Gibson R F. Mechanics of mechanically fastened joints in polymer-matrix composite structures:A review[J]. Composites Science and Technology, 2009, 69(3-4):301-329.
[22] Yuan P J, Wang Q S, Shi Z Y, et al. A micro-adjusting attitude mechanism for autonomous drilling robot end-effector[J]. Science China Information Sciences, 2014, 57(12):1-12.
[23] 陈勋漫, 黄沿江, 张宪民. 基于轴线法与卡尔曼滤波的Baxter机器人标定[J]. 振动测试与诊断, 2017, 37(5):970-977, 1066-1067.
[24] Khalil W, Dombre E. Modeling, identification and control of robots[J]. Applied Mechanics Reviews, 2003, 56(3):B34-B50.
[25] Denavit J, Hartenberg R S. 54 kinematic parameted[J]. Journal of Applied Mechanics, 1955, 77(2):215-221.
[26] Hayati S, Mirmirani M. Improving the absolute positioning accuracy of robot manipulators[J]. Journal of Field Robotics, 2010, 2(4):397-413.
[27] Abderrahim M, Whittaker A R. Kinematic model identification of industrial manipulators[J]. Robotics & Computer Integrated Manufacturing, 2000, 16(1):1-8.
[28] 宫金良, 黄风安, 张彦斐. 基于指数积的Delta机器人运动学正解建模[J]. 北京理工大学学报, 2013, 33(6):581-585.
[29] Joubair A, Bonev I A. Kinematic calibration of a six-axis serial robot using distance and sphere constraints[J]. International Journal of Advanced Manufacturing Technology, 2015, 77(1-4):515-523.
[30] 张旭, 郑泽龙, 齐勇. 6自由度串联机器人D-H模型参数辨识及标定[J]. 机器人, 2016, 38(3):360-370.
[31] 郭发勇, 梅涛, 赵江海. D-H法建立连杆坐标系存在的问题及改进[J]. 中国机械工程, 2014, 25(20):2710-2714.
[32] Filion A, Joubair A, Tahan A S, et al. Robot calibration using a portable photogrammetry system[J]. Robotics & Computer Integrated Manufacturing, 2018, 49:77-87.
[33] Matej L. Measuring inspection of CNC milling machine accurate by means of Ballbar QC10 system[J]. Journal of Biological Chemistry, 2010, 274(36):25260-25265.
[34] Icli C, Stepanenko O, Bonev I. New method and portable measurement device for the calibration of industrial robots[J]. Sensors, 2020, 20(20):5919-5933.
[35] 杜亮, 张铁, 戴孝亮. 激光跟踪仪测量距离误差的机器人运动学参数补偿[J]. 红外与激光工程, 2015, 44(8):2351-2357.
[36] Posada J, Schneider U, Pidan S, et al. High accurate robotic drilling with external sensor and compliance model-based compensation[C]//2016 IEEE International Conference on Robotics and Automation. Stockholm, Sweden:IEEE, 2016:3901-3907.
[37] Hughes B, Forbes A, Lewis A, et al. Laser tracker error determination using a network measurement[J]. Measurement Science & Technology, 2011, 22(4):045103.
[38] Oh Y T. Robot accuracy evaluation using a ball-bar link system[J]. Robotica, 2011, 29(6):917-927.
[39] 洪振宇, 梅江平, 赵学满, 等. 基于球杆仪检测信息的并联机构运动学标定[J]. 机械工程学报, 2007(7):16-22.
[40] Kolyubin S, Paramonov L, Shiriaev A. Robot kinematics identification:KUKA LWR4+ redundant manipulator example[J]. Journal of Physics Conference Series, 2015, 659(1):012011.
[41] Haznedar B, Kalinli A. Training ANFIS structure using simulated annealing algorithm for dynamic systems identification[J]. Neurocomputing, 2018, 302(9):66-74.
[42] Sun Z, Yang Z Y. Study of nonlinear parameter identification using UKF and Maximum Likelihood method[C]//2010 IEEE International Conference on Control Applications. Yokohama, Japan:IEEE, 2010:671-676.
[43] Park I W, Lee B J, Cho S H, et al. Laser-based kinematic calibration of robot manipulator using differential kinematics[J]. IEEE/ASME Transactions on Mechatronics, 2012, 17(6):1059-1067.
[44] Yier W, Alexandr K, Stéphane C, et al. Geometric calibration of industrial robots using enhanced partial pose measurements and design of experiments[J]. Robotics and Computer Integrated Manufacturing, 2015, 35:151-168.
[45] Marquardt D W. An algorithm for least-squares estimation of nonlinear parameters[J]. Journal of the Society for Industrial & Applied Mathematics, 1963, 11(2):431-441.
[46] Lightcap C, Hamner S, Schmitz T, et al. Improved positioning accuracy of the PA10-6CE robot with geometric and flexibility calibration[J]. IEEE Transactions on Robotics, 2008, 24(2):452-456.
[47] 刘湛基, 王晗, 陈桪, 等. 机器人与激光跟踪仪的坐标系转换方法研究[J]. 中国测试, 2017, 43(11):102-107.
[48] Santolaria J, Conte J, Manuel G. Laser tracker-based kinematic parameter calibration of industrial robots by improved CPA method and active retroreflector[J]. International Journal of Advanced Manufacturing Technology, 2013, 66(9-12):2087-2106.
[49] Nubiola A, Bonev I A. Absolute calibration of an ABB IRB 1600 robot using a laser tracker[J]. Robotics & Computer Integrated Manufacturing, 2013, 29(1):236-245.
[50] 王一, 刘常杰, 任永杰, 等. 工业坐标测量机器人定位误差补偿技术[J]. 机械工程学报, 2011, 47(15):31-36.
[51] 何晓煦, 田威, 曾远帆, 等. 面向飞机装配的机器人定位误差和残差补偿[J]. 航空学报, 2017, 38(4):292-302.
[52] Tian W, Mei D Q, Li P C, et al. Determination of optimal samples for robot calibration based on error similarity[J]. Chinese Journal of Aeronautics, 2015, 28(3):946-953.
[53] 田国良, 卜昆, 邱飞, 等. 基于BP神经网络的熔模铸件收缩率预测研究[J]. 航空制造技术, 2018, 61(9):47-51.
[54] Vosniakos G C, Angelidis A. Prediction and compensation of relative position error along industrial robot endeffector paths[J]. International Journal of Precision Engineering & Manufacturing, 2014, 15(1):63-73.
[55] Nguyen H N, Zhou J, Kang H J. A calibration method for enhancing robot accuracy through integration of an extended Kalman filter algorithm and an artificial neural network[J]. Neurocomputing, 2015, 151(3):996-1005.
[56] Santiago D. Real time path correction of industrial robots with direct end-effector feedback from a laser tracker[J]. Sae International Journal of Aerospace, 2014, 7(2):222-228.
[57] Russell D V, Todd S. Improved accuracy of unguided articulated robots[J]. Sae International Journal of Aerospace, 2009, 2(1):40-45.
[58] Russell D, Todd S. Applied accurate robotic drilling for aircraft fuselage[J]. Sae International Journal of Aerospace, 2010, 3(1):180-186.
[59] Wu B, Zhang Y. Reference sphere positioning measurement based on line-structured light vision sensor[J]. Advances in Mechanical Engineering, doi:10.1155/2013/587904.
[60] 邾继贵, 张楠楠, 任永杰, 等. 基于双目立体视觉的工业机器人在线温度补偿[J]. 光学精密工程, 2018, 26(9):2139-2149.
[61] Morozov M, Riise J, Summan R, et al. Assessing the accuracy of industrial robots through metrology for the enhancement of automated non-destructive testing[C]//IEEE International Conference on Multisensor Fusion & Integration for Intelligent Systems. Kongresshaus BadenBaden, Germany:IEEE, 2017:335-340.
