研究论文

纤维暂堵人工裂缝附加压差影响因素分析

  • 汪道兵 ,
  • 周福建 ,
  • 葛洪魁 ,
  • 卢渊 ,
  • 严星明
展开
  • 1. 中国石油大学(北京)非常规天然气研究院, 北京102249;
    2. 中国石油勘探开发研究院研究生部, 北京100083;
    3. 成都理工大学能源学院, 成都610059;
    4. 中国石油勘探开发研究院廊坊分院, 廊坊065007
汪道兵,博士研究生,研究方向为非常规储层人工缝网形成与控制机制,电子信箱:0546wdb@163.com

收稿日期: 2014-12-23

  修回日期: 2015-05-07

  网络出版日期: 2015-12-15

基金资助

国家重点基础研究发展计划(973计划)项目(2015CB250903);国家自然科学基金重大项目(51490652);国家自然科学基金青年科学基金项目(41304141);中国石油天然气股份有限公司科学研究与技术开发项目(2010E-2105,2014A-4212);中国科学院先导科技项目(XDB10050203);中石油科技创新基金项目(2013D-5006-0213)

Analysis of factors influencing additional pressure drop of fiber-assisted temporary blocking of an artificial fracture

  • WANG Daobing ,
  • Zhou Fujian ,
  • GE Hongkui ,
  • LU Yuan ,
  • YAN Xingming
Expand
  • 1. Unconventional Natural Gas Research Institute, China University of Petroleum, Beijing 102249, China;
    2. Graduate School, Research Institute of Petroleum Exploration & Development, China National Petroleum Corporation, Beijing 100083, China;
    3. College of Energy Resources, Chengdu University of Technology, Chengdu 610059, China;
    4. Langfang Branch, PetroChina Research Institute of Petroleum Exploration & Development, Langfang 065007, China

Received date: 2014-12-23

  Revised date: 2015-05-07

  Online published: 2015-12-15

摘要

地层温度条件下自动可降解纤维能有效暂堵已形成的人工裂缝或天然裂缝,大幅提高缝内净压力,从而迫使人工裂缝发生转向,从其他方向启裂与扩展,增加油气藏改造体积。此时纤维在裂缝内形成滤饼填充带,形成一附加压差。理解纤维暂堵人工裂缝附加压差的影响因素,是优化纤维暂堵转向压裂设计关键参数的基础。由于缝内纤维滤饼引起附加压差影响因素众多,纤维转向压裂关键参数优化难度较大,本研究以纤维暂堵人工裂缝的物理模型为基础,利用经典水力压裂理论,推导并求解纤维滤饼附加压差的数学模型,模拟计算其影响因素的变化规律。模拟结果表明,较低排量、较小裂缝宽度和较高黏度有利于增大附加压差,加强纤维封堵裂缝的效果。结合裂缝延伸准则,得出井底压力增量与附加纤维滤饼长度两者成线性增加关系。

本文引用格式

汪道兵 , 周福建 , 葛洪魁 , 卢渊 , 严星明 . 纤维暂堵人工裂缝附加压差影响因素分析[J]. 科技导报, 2015 , 33(22) : 73 -77 . DOI: 10.3981/j.issn.1000-7857.2015.22.012

Abstract

An automatically degradable fiber at reservoir temperature could be used to temporarily block artificial or natural fractures effectively. After injecting diverting clean fiber into the fracture, net pressure in the blocked fracture will be remarkably increased. Then it forces the artificial fracture to re-orientate, i.e. fractures are initiated and propagate in another direction. This stimulation technology will improve the stimulated volume of hydrocarbon reservoirs. In the blocking process, the fiber cake zone will be formed in the fracture. It will produce an additional pressure drop when hydraulic fracturing fluid is injected through the blocked fracture. It is the basis for optimizing the critical parameters of design program of fiber-assisted diverting fracturing to understand the influential factors of additional pressure drop induced by the fiber cake. Because additional pressure drop is related with many factors, it is very difficult to optimize the critical parameters of fiber-assisted diverting fracturing. In this paper, on the basis of the physical model of the blocking, the mathematical model of additional pressure drop induced by fiber cake is deduced and calculated by adopting the classical theory of hydraulic fracturing. The change rule of its influential factors is numerically simulated. The results show that low injection rate, small fracture width and high viscosity will be beneficial to increase the additional pressure drop and improve the temporary blocking effect. According to the propagation criterion of tensile fracture, the relationship between the bottom hole pressure increment and the required length of additional fiber is obtained. Excellent linearity between them is achieved.

参考文献

[1] Zhou F J, Liu Y Z, Liu X F, et al. Case study: YM204 obtained high petroleum production by acid fracture treatment combining fluid diversion and fracture reorientation[C]//SPE 8th European Formation Damage Conference. Scheveningen, The Netherlands, May 27-29, 2009: SPE-121827-MS.
[2] 周福建, 伊向艺, 杨贤友, 等. 提高采收率纤维暂堵人工裂缝动滤失实 验研究[J]. 钻采工艺, 2014, 37(4): 83-86. Zhou Fujian, Yi Xiangyi, Yang Xianyou, et al. Dynamic filtration experiment study on EOR fiber on bridging the artificial fracture[J]. Drilling and Production Technology, 2014, 37(4): 83-86.
[3] Potapenko D I, Tinkham S K, Lecerf B, et al. Barnett shale refracture stimulations using a novel diversion technique[C]// SPE Hydraulic Fracturing Technology Conference. The Woodlands, Texas, USA, January 19-21, 2009: SPE-119636-MS.
[4] Allison D B, Shawn S C, Todd B L. Restimulation of wells using biodegradable particulates as temporary diverting agents[C]// Canadian Unconventional Resources Conference. Calgary, Alberta, Canada, November 15-17, 2011: CSUG/SPE-149221-MS.
[5] Retnanto A, Lynn C W, Orellana E. Managing uncertainty of reservoir heterogeneity and optimizing acid placement in thick carbonate reservoirs[C]//SPE International Production and Operations Conference & Exhibition. Doha, Qatar, May 14-16, 2012: SPE-155079-MS.
[6] Cohen C E, Tardy P M J, Lesko T M, et al. Understanding diversion with a novel fiber-laden acid system for matrix acidizing of carbonate formations[C]//SPE Annual Technical Conference and Exhibition. Florence, Italy, September 19-22, 2010: SPE-134495-MS.
[7] Ramakrishnan H, Yuyan R, Belhadi J. Real- time completion optimization of multiple laterals in gas shale reservoirs: integration of geology, log, surface seismic, and microseismic information[C]// SPE Hydraulic Fracturing Technology Conference. The Woodlands, Texas, USA, January 24-26, 2011: SPE-140542-MS.
[8] 才博, 王晓冬, 王欣. 人工裂缝缝壁表皮效应数学模型研究[J]. 中国矿 业大学学报, 2011, 40(6): 938-942. Cai Bo, Wang Xiaodong, Wang Xin, et al. Mathematical study of fracture face skin in hydraulic fractures[J]. Journal of China University of Mining & Technology, 2011, 40(6): 938-942.
[9] Jamiolahmady M, Danesh A, Tehrani D H, et al. New mechanical and damage skin factor correlations for hydraulic fractured wells[C]// European Formation Damage Conference. Scheveningen, The Netherlands, June 30-May 1, 2007: SPE-107634-MS.
[10] Romero D J, Valko P P, Economides M J. The optimization of the productivity index and the fracture geometry of a stimulated well with fracture face and choke skins[C]//International Symposium and Exhibition on Formation Damage Control. Lafayette, Louisiana, USA, February 20-21, 2002: SPE-73758-MS.
[11] Powell A, Bustos O, Kordziel W, et al. Fiber-laden fracturing fluid improves production in the bakken shale multilateral play[C]//Rocky Mountain Oil & Gas Technology Symposium. Denver, Colorado, USA, April 16-18, 2007: SPE-107979-MS.
[12] 王鸿勋, 张士诚. 水力压裂数值计算方法[M]. 北京: 石油工业出版 社, 1998: 55-58. Wang Hongxun, Zhang Shicheng. Hydraulic fracturing numerical calculation method[M]. Beijing: Petroleum Industry Press, 1998: 55- 58.
[13] Economides M J, Nolte K G. Reservoir stimulation[M]. 3rd ed. New York: Wiley, 2003.
[14] 宋佳, 卢渊, 李永寿, 等. 煤岩压裂液动滤失实验研究[J]. 油气藏评价 与开发, 2011, 1(2): 74-77. Song Jia, Lu Yuan, Li Yongshou, et al. Experiment research on fracture fluid dynamic filtration of coal rocks[J]. Reservoir Evaluation and Development, 2011, 1(2): 74-77.
[15] Bukovac T, Nihat M G, Jauregui L J, et al. Stimulaion strategies to guard against uncertainties of carbonate reservoirs[C]//SPE Saudi Arabia Section Technical Symposium and Exhibition. Al- Khobar, Saudi Arabia, April 8-11, 2012: SPE-160887-MS.
[16] Solares J R, Duenas J J, Al-Harbi M, et al. Field trial of a new nondamaging degradable fiber-diverting full zonal coverage during acid fracturing in a deep gas producer in Saudi Arabia[C]//SPE Annual Technical Conference and Exhibition. Denver, Colorado, USA, September 21-24, 2008: SPE-115525-MS.
[17] 汪道兵. 直井纤维暂堵转向压裂裂缝启裂与延伸数学模型研究[D]. 成都: 成都理工大学, 2013. Wang Daobing. Study on the mathematical model about the fiber temporary plugging diverting fracturing crack initiation and propagation of the vertical wells[D]. Chengdu: Chengdu University of Technology, 2013.
[18] Wang D B, Zhou F J, Ding W, et al. A numerical simulation study of fracture reorientation with a degradable fiber- diverting agent[J]. Journal of Natural Gas Science and Engineering, 2015, 25: 215-225.
[19] 汪道兵, 葛洪魁, 周福建, 等. 注入流体诱导应力场模拟计算[J]. 东北 石油大学学报, 2015, 39(2): 85-93. Wang Daobing, Ge Hongkui, Zhou Fujian, et al. Numerical simulation of the injected fluid induced stress field[J]. Journal of Northeast Petroleum University, 2015, 39(2): 85-93.
[20] Zhang J C, Bian X B, Zhang S C, et al. Research of seepage in artificial fracture using pore network model[J]. Science China- Technological Sciences, 2013, 56(3): 756-761.
[21] Zhang J C, Bian X B, Zhang S C, et al. Experimental evaluation of fracture stabilizer[J]. Petroleum Exploration and Development, 2013, 40 (2): 254-258.
文章导航

/